Страница 1 из 1 [ Сообщений: 4 ] Версия для печати [+] |
сайт TechPowerUP! выложил новую версию "внутренней" утилиты по разгону видеочипов ATI.
версия WinClock 5.22 поддерживает разгон карт серии X1000. скачать ее можно здесь — 308к внутри архива файл с изменениями: CHANGE.LOG WINCLK (Windows-based Memory & Engine Clock Setting Utility) ============================================================ [1.00] 10/17/01 — initial version (internal release) [1.01] 11/28/01 — Changed SETCLK.EXE to WINCLK.EXE v1.01 — Updated ATISTCLK.DLL to v4.16.1001 from v4.16.1000 \ re-structured accordingly with the VxD — Updated ATIRXGAA.VXD to v4.17.1000 from v4.16.1000 \ both physical & logical addresses are passed to the DLL [1.02] 12/07/01 — Added support for Windows2000 & XP — Added ATIXPGAA.SYS v4.13.1.1002 \ device driver for Windows2000/XP — Updated ATISTCLK.DLL to v4.16.1002 from v4.16.1001 — Updated WINCLK.EXE to v1.02 from v1.01 [1.03] 12/18/01 — Updated WINCLK.EXE to v1.03 from v1.02 — Updated ATISTCLK.DLL to v4.16.1003 from v4.16.1002 \ fixed bug on running the application from long directory names and starting from desktop shortcut. [1.04] 12/19/01 — Updated WINCLK.EXE to v1.04 from v1.03 \ fixed loading of Winclk dialog box if error occurs — Updated ATISTCLK.DLL to v4.16.1004 from v4.16.1003 \ fixed bug if an unsupported device is detected — Renamed ATIRXGAA.VXD to ATIR6GAA.VXD and changed version to v4.18.1000 from v4.17.1000 [1.05] 01/08/02 — Updated WINCLK.EXE to v1.05 from v1.04 — Updated ATISTCLK.DLL to v4.16.1005 from v4.16.1004 \ fixed bug on Win2K (used 16bit register write) [1.06] 01/25/02 — Updated WINCLK.EXE to v1.06 from v1.05 — Updated ATISTCLK.DLL to v4.16.1006 from v4.16.1005 \ added support for R200 WS (FireGL), RV200 (0x5158) & M7 (0x4C58) \ updated resetting of DDR memory for freq below 100MHz (DLL disabled) & above 100MHz (DLL enabled) — Updated ATIR6GAA.VXD to v4.19.1000 from v4.18.1000 \ added support for Cabo & Wilma chipsets [1.07] 02/07/02 — Updated WINCLK.EXE to v1.07 from v1.06 — Updated ATISTCLK.DLL to v4.16.1007 from v4.16.1006 \ fixed bugs that causes hang problem while resetting the memory. \ added memory clock info for Cabo & Wilma (Win9X OS only) [1.08] 02/11/02 — Updated WINCLK.EXE to v1.08 from v1.07 \ fixed bug (e.g. window closes after pressing <enter>) — Updated ATIR6GAA.VXD to v4.21.1000 from v4.19.1000 — Updated ATISTCLK.DLL to v4.16.1008 from v4.16.1007 \ added API function calls to get Northbridge pci config space \ removed MEM_SDRAM_MODE_REG init for Cabo & Wilma chipsets [1.09] 02/18/02 — Updated WINCLK.EXE to v1.09 from v1.08 \ fixed loading of multiple instances — Updated ATISTCLK.DLL to v4.16.1009 from v4.16.1008 \ disabled all active clients such as displays, mem refresh, cursor, and deasserts MC_INIT_COMPLETE in order to properly set the clock, does MCLK/YCLK resync and memory reset. [1.10] 03/12/02 — Updated WINCLK.EXE to v1.10 from v1.09 — Updated ATISTCLK.DLL to v4.16.1010 from v4.16.1009 \ used nmult=1 & post divider=1 for Wilma A11 chips due to hardware bug \ corrected memory clock speed if SYNC or using frontside bus clock speed on Wilma chipsets (Win9X only) [1.11] 04/08/02 — Updated WINCLK.EXE to v1.11 from v1.10 — Updated ATISTCLK.DLL to v4.16.1011 from v4.16.1010 — Updated ATIR6GAA.VXD to v4.21.1001 from v4.21.1000 \ added support for RV250 (Iris) [1.12] 05/17/02 — Updated WINCLK.EXE to v1.12 from v1.11 — Updated ATISTCLK.DLL to v4.16.1012 from v4.16.1011 \ added detection for Wilma A14 and used the same nmult & postdiv as other graphics chip, whereas Wilma A11, A12 & A13 chips retain the changes in v2.12 release \ sourced SCLK from PCICLK before programming registers \ added changes for R300 A11: (to sync-in with Setclk for DOS) — CG workaround — SDR/DDR detection — fix REF_DIV, MCLK_SRC_SEL and MPLL_PVG at BIOS default — MC index register changed — Updated ATIR6GAA.VXD to v4.21.1002 from v4.21.1001 \ added support for R300 (with 0x4E4? device IDs) — Updated ATIXPGAA.SYS to v4.13.3.1002 from v4.13.1.1002 [1.13] 05/22/02 — Updated WINCLK.EXE to v1.13 from v1.12 — Updated ATISTCLK.DLL to v4.16.1013 from v4.16.1012 \ removed switching of memory clock to PCIclk (causes screen corruption on WinXP) — Updated ATIXPGAA.SYS to v4.14.3.1002 from v4.13.3.1002 \ fixed bugs on WinXP [1.14] 06/04/02 — Updated WINCLK.EXE to v1.14 from v1.13 — Updated ATISTCLK.DLL to v4.16.1014 from v4.16.1013 \ fixed detection of Northbridge deviceID & revisionID on WinXP \ added reading of memory clock for Cabo & Wilma (WinXP/NT) — Updated ATIXPGAA.SYS to v4.15.3.1002 from v4.14.3.1002 \ added control codes to read/write from/to Northbridge config space [1.15] 06/11/02 — Updated WINCLK.EXE to v1.15 from v1.14 — Updated ATISTCLK.DLL to v4.16.1015 from v4.16.1014 \ added support for Wilma deviceID "0xCBB2" [1.16] 07/15/02 — Updated WINCLK.EXE to v1.16 from v1.15 — Updated ATISTCLK.DLL to v4.16.1016 from v4.16.1015 \ added support for Cabo rev.A31 [1.17] 09/17/02 — Updated WINCLK.EXE to v1.17 — Updated ATISTCLK.DLL to v4.16.1017 — Updated ATIR6GAA.VXD to v4.22.1002 \ added support for newer R300 chipIDs, RV280, M9+, RV350, & M10 [1.18] 12/06/02 — Updated WINCLK.EXE to v1.18 — Updated ATISTCLK.DLL to v4.16.1018 — Updated ATIR6GAA.VXD to v4.22.1002 — Updated ATIXPGAA.SYS to v4.15.3.1002 \ added support for newer R350 chipIDs \ fixed bug in setting R300 SCLK and lowered R300 MPLL cutoff frequency [1.19] 01/22/03 — Updated WINCLK.EXE to v1.19 — Updated ATISTCLK.DLL to v4.16.1019 \ added suport for RS300 & RS250 \ fixed bug in setting RV350 memory clock [1.20] 02/14/03 — Updated WINCLK.EXE to v1.20 — Updated ATISTCLK.DLL to v4.16.1020 \ added support for RS300 & RS250 memory clock and core voltage \ added DDR2 support \ fixed R300 single PLL support [1.21] 03/03/03 — Updated WINCLK.EXE to v1.21 — Updated ATISTCLK.DLL to v4.16.1021 \ fixed bug in reading RS300 memory clock \ updated parameters for new hynix memory on R300 \ added function to disable single PLL setting for RS300 or RS250 [1.22] 04/16/03 — Updated WINCLK.EXE to v1.22 — Updated ATISTCLK.DLL to v4.16.1022 — updated chip id list — keep MPLL freq low for RV280 & fixed mclk sync problem for RV280 — powerdown DLL if it is not being uded for R300 and up — extended setclk eng clk to play with Ref_Div — read refresh rate from SPD [1.23] 04/22/03 — Updated WINCLK.EXE to v1.23 — Updated ATISTCLK.DLL to v4.16.1023 — fixed RS250 fast/slow clk switch problem [1.24] 07/23/03 — Updated WINCLK.EXE to v1.24 — Updated ATISTCLK.DLL to v4.16.1024 \ added support for newer R360, RV360 & M11, RV380 & M24 chipIDs [1.25] 09/08/03 — Updated WINCLK.EXE to v1.25 — Updated ATISTCLK.DLL to v4.16.1025 — Updated ATIXPGAA.SYS \ added support for latest RV350, M10 & M11 chipIDs \ fixed RV380 detection issue [1.26] 10/31/03 — Updated WINCLK.EXE to v1.26 — Updated ATISTCLK.DLL to v4.16.1026 — Updated ATIXPGAA.SYS \ added support for newer RS350 chipIDs [1.27] 11/11/03 — Updated WINCLK.EXE to v1.27 — Updated ATISTCLK.DLL to v4.16.1027 \ added help file support \ removed memory reset if only change engine clock [1.28] 11/26/03 — Updated WINCLK.EXE to v1.28 — updated ATISTCLK.DLL to v4.16.1028 \ fixed Memory Clock reporting error when entering power play modes for RS300 [1.29] 11/27/03 — Updated WINCLK.EXE to v1.29 — Added Autoupdate feature via checkbox. Enabling this feature will update the engine & memory clock values every 5 seconds [1.30] 12/01/03 — Updated WINCLK.EXE to v1.30 — Added command line compatibility for setting/inc/dec mem/eng clk, viewing clock info, core voltage, resetting mem/eng clk & single pll [1.31] 01/31/04 — Updated WINCLK.EXE to v1.31 — Updated ATISTCLK.DLL — Updated ATIXPGAA.SYS \ added support for RV370 and M22 ASICs [1.32] 02/12/04 — Updated WINCLK.EXE to v1.32 — Updated ATIXPGAA.SYS to v4.17.3.1002 \ fixed bus detection issue [1.33] 03/01/04 — Updated WINCLK.EXE to v1.33 — Updated ATIXPGAA.SYS to 4.18.3.1002 — Updated ATISTCLK.DLL to 4.16.1029 — added support for R420/R423 — Known bug on R420 GDDR3, Memory clock switching causes corruption on screen [1.40] 03/16/04 — Bug fix of display corruption for R420 GDDR3 when changing mem clk. — updated WINCLK.EXE to v1.40 — updated ATISTCLK.DLL — updated ATIXPGAA.SYS — added support for M18 [1.41] 03/18/04 — Bug fix for display corruption when changed mclk to below 300Mhz [1.42] 03/30/04 — Bug fix for display corription with M22/M24 [1.43] 04/06/04 — Improved loading/execution time by calling a new function in 'atixpgaa.sys' driver by reading the contents of the whole BIOS in one single pass. — New 'help' command line option. — New Max SPLL/MPLL Freq for R300 base and R400 base chipset when memory or engine clk is changed [1.44] 04/27/04 — Now supports >600MHz Memory clock on R420/423 [1.45] 04/28/04 — Added support for RV410/M26 [1.46] 05/10/04 — Updated RV410 support [1.47] 05/11/04 — Updated Winclk to v1.47 — Updated ATIXPGAA.SYS to 4.22.3.1002 — Updated ATISTCLK.DLL to 1.0.0.34 — Added support for RS400 [1.48] 05/12/04 — Updated Winclk to v1.48 — Updated ATISTCLK.DLL to 1.0.0.35 — Added support for RS480 [1.49] 05/19/04 — Updated Winclk to v1.49 — Updated ATISTCLK.DLL to 1.0.0.36 — Fix for display corruption when mclk < 180 on M18 w/ GDDR1 [1.50] 05/20/04 — Updated Winclk to v1.50 — Updated ATISTCLK.DLL to 1.0.0.37 — Fixed RS400 async mode algorithm — Fixed RS480 UMA async mode algorithm — Fixed VCO out of range issue [2.00] 06/17/04 — Updated Winclk to v2.00 — Updated ATISTCLK.DLL to 1.0.0.38 — Added ATIDGLLK.SYS to 3.0.19.12 — RS480, switch between normal & PM registers, instead of always switch back normal set — Updated RS480 side port mode with new VCO values, allow the algorithm to use post divider 1 & extend FB_div range [2.10] 06/22/04 — Updated Winclk to v2.10 — Updated ATISTCLK.DLL to 1.0.0.39 — Bug Fix — Fix for 64-bit addressing [2.20] 06/24/04 — Updated Winclk to v2.20 — Updated ATISTCLK.DLL to 1.0.0.40 — Updated Device IDs for RV410 [2.30] 08/18/04 — Updated Winclk to v2.30 — Bug Fix [2.40] 09/26/04 — Updated Winclk to v2.40 — Updated ATISTCLK.DLL to 1.0.0.41 — RS480 memory >350M, using higher VCO settings — Fixed issues in RS400 Async mode [2.50] 10/5/04 — Updated Winclk to v2.50 — Updated ATISTCLK.DLL to 1.0.0.42 — Fixed program bug, M18 flag got turn on accidentally [2.70] 02/08/05 — Updated RC410/RS482 chip ID's — Updated ATISTCLK.DLL to 1.0.0.44 [2.80] 03/10/05 — Updated RN50 chip ID's — Updated Winclk to v2.80 — Updated ATISTCLK.DLL TO 1.0.0.45 [3.00] 05/06/05 — add support for multiple GPUs — combine R520 support into one program [3.01] 05/24/05 — add support for RV515 [3.10] 06/01/05 — add support for new SetMemoryClock table in ATOMBios [3.30] 06/27/05 — add support for new ATOMBIOS parser — add printclkinfo flag to output current clock settings to a file [3.40] 07/07/05 — add support for R580/M59 [3.50] 07/13/05 — added clk setting table for MEM_PLL_CHPUMP_CURRENT for RS400 — fixed RS480 sideport async memory clock setting problem — updated ATISTCLK.DLL TO 1.0.0.46 — updated Winclk to v3.50 [3.60] 09/13/05 — added 64-bit support — added incvoltage,decvoltage command line flags for RX5XX ASICS — disabled memory clock settings for RS480,RS482 in UMA mode — updated ATISTCLK DLL to 1.0.0.47 — updated R5CLKLIB DLL to 1.0.0.9 [3.70] 09/28/05 — added RS600 support — updated R5CLKLIB.DLL to 1.0.0.10 — updated Winclk to v3.70 [3.80] 11/01/05 — fixed both mem and eng clock routines for RS600 — updated R5CLKLIB.DLL to 1.0.0.11 — updated Winclk to v3.80 [3.90] — fixed RS600 mem clock routine — updated R5CLKLIB to 1.0.0.12 — updated winclk to v3.90 [4.00] 11/07/05 — changed GUI interface — added 2D/3D clock support — added support for RV505/RV516 — added support for fanspeed control — added VDDC,MVDDC,MVDDQ support [4.03] 12/19/05 — updated RS480 sideport async memory clock fix — updated ATISTCLK.DLL TO 1.0.0.50 — updated Winclk to v4.03 [5.00] 01/11/06 — Changed Interface to add VDDCI — updated code to use new aticlocklib.dll library — fixed AutoUpdate support — added commandline support for 3D clocks [5.01] 02/01/06 — fixed 'Error Loading Driver' Messages on IA-64 systems [5.10] 02/16/06 — added support for RV516/M64/M62 [5.11] 02/17/06 — fixed both mem and eng clock routines for RV516/M64/M62 [5.20] 02/17/06 — moved RS600 code into aticlocklib.dll — added separate ATI NB mem clock function — updated ATISTCLK.DLL TO 1.0.0.51 — updated Winclk to v5.20 [5.21] 02/23/06 — fixed 'Error Loading Driver' Messages on EMT-64 systems — Added support for RV570/RV560/M68/M67 — Added command line switches for incrementing/decrementing the clocks — Added support for new setclock method — updated Winclk to v5.21 [5.22] 02/27/06 — updated aticlocklib.dll to latest version to support RV570 correctly выглядит все это так: "изюминкой" ATI WinClock наверное можно назвать поддержку не только изменения вольтажа на серии X1000, но также поддержку разгона для мобильных и интегрированных чипов! Последний раз редактировалось AndreyPopov 18:08 13.08.2006, всего редактировалось 1 раз. |
а у меня на 9800 — Failed: Could not load device driver
|
AMD GPU Clock Tool v0.7
[0.2] Jan 8, 2007 — initial beta version [0.3] Jan 26, 2007 — added thermal sensors page [0.4] Jan 30, 2007 — supports multiple board configuration in thermal page correctly — 2D/3D clock switching supported (XP) [0.5] Mar 18, 2007 — support RV630/RV610 — support Vista 64 [0.6] Apr 4, 2007 — name change to AMD GPU clock tool — support 2d/3d clock switching for R600 in Vista32/Vista64 [0.7] Apr 26, 2007 — real time clock reading update support |
amd gpu clock tool умеет принимать ключи-частоты при запуске? а то если ее нельзя в автозагрузку прописать, какой с нее толк..
|
Новая тема Ответить | Страница 1 из 1 |
[ Сообщений: 4 ] |
Кто сейчас на конференции |
Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 18 |
Вы не можете начинать темы Вы не можете отвечать на сообщения Вы не можете редактировать свои сообщения Вы не можете удалять свои сообщения Вы не можете добавлять вложения |