сайт TechPowerUP! выложил новую версию "внутренней" утилиты по разгону видеочипов ATI.
версия WinClock 5.22 поддерживает разгон карт серии X1000.
скачать ее можно здесь — 308к
внутри архива файл с изменениями:
CHANGE.LOG
WINCLK (Windows-based Memory & Engine Clock Setting Utility)
============================================================
[1.00] 10/17/01
— initial version (internal release)
[1.01] 11/28/01
— Changed SETCLK.EXE to WINCLK.EXE v1.01
— Updated ATISTCLK.DLL to v4.16.1001 from v4.16.1000
\ re-structured accordingly with the VxD
— Updated ATIRXGAA.VXD to v4.17.1000 from v4.16.1000
\ both physical & logical addresses are passed to the DLL
[1.02] 12/07/01
— Added support for Windows2000 & XP
— Added ATIXPGAA.SYS v4.13.1.1002
\ device driver for Windows2000/XP
— Updated ATISTCLK.DLL to v4.16.1002 from v4.16.1001
— Updated WINCLK.EXE to v1.02 from v1.01
[1.03] 12/18/01
— Updated WINCLK.EXE to v1.03 from v1.02
— Updated ATISTCLK.DLL to v4.16.1003 from v4.16.1002
\ fixed bug on running the application from long directory names
and starting from desktop shortcut.
[1.04] 12/19/01
— Updated WINCLK.EXE to v1.04 from v1.03
\ fixed loading of Winclk dialog box if error occurs
— Updated ATISTCLK.DLL to v4.16.1004 from v4.16.1003
\ fixed bug if an unsupported device is detected
— Renamed ATIRXGAA.VXD to ATIR6GAA.VXD and changed version to
v4.18.1000 from v4.17.1000
[1.05] 01/08/02
— Updated WINCLK.EXE to v1.05 from v1.04
— Updated ATISTCLK.DLL to v4.16.1005 from v4.16.1004
\ fixed bug on Win2K (used 16bit register write)
[1.06] 01/25/02
— Updated WINCLK.EXE to v1.06 from v1.05
— Updated ATISTCLK.DLL to v4.16.1006 from v4.16.1005
\ added support for R200 WS (FireGL), RV200 (0x5158) & M7 (0x4C58)
\ updated resetting of DDR memory for freq below 100MHz (DLL disabled)
& above 100MHz (DLL enabled)
— Updated ATIR6GAA.VXD to v4.19.1000 from v4.18.1000
\ added support for Cabo & Wilma chipsets
[1.07] 02/07/02
— Updated WINCLK.EXE to v1.07 from v1.06
— Updated ATISTCLK.DLL to v4.16.1007 from v4.16.1006
\ fixed bugs that causes hang problem while resetting the memory.
\ added memory clock info for Cabo & Wilma (Win9X OS only)
[1.08] 02/11/02
— Updated WINCLK.EXE to v1.08 from v1.07
\ fixed bug (e.g. window closes after pressing <enter>)
— Updated ATIR6GAA.VXD to v4.21.1000 from v4.19.1000
— Updated ATISTCLK.DLL to v4.16.1008 from v4.16.1007
\ added API function calls to get Northbridge pci config space
\ removed MEM_SDRAM_MODE_REG init for Cabo & Wilma chipsets
[1.09] 02/18/02
— Updated WINCLK.EXE to v1.09 from v1.08
\ fixed loading of multiple instances
— Updated ATISTCLK.DLL to v4.16.1009 from v4.16.1008
\ disabled all active clients such as displays, mem refresh, cursor,
and deasserts MC_INIT_COMPLETE in order to properly set the clock,
does MCLK/YCLK resync and memory reset.
[1.10] 03/12/02
— Updated WINCLK.EXE to v1.10 from v1.09
— Updated ATISTCLK.DLL to v4.16.1010 from v4.16.1009
\ used nmult=1 & post divider=1 for Wilma A11 chips due to hardware bug
\ corrected memory clock speed if SYNC or using frontside bus clock speed on Wilma chipsets (Win9X only)
[1.11] 04/08/02
— Updated WINCLK.EXE to v1.11 from v1.10
— Updated ATISTCLK.DLL to v4.16.1011 from v4.16.1010
— Updated ATIR6GAA.VXD to v4.21.1001 from v4.21.1000
\ added support for RV250 (Iris)
[1.12] 05/17/02
— Updated WINCLK.EXE to v1.12 from v1.11
— Updated ATISTCLK.DLL to v4.16.1012 from v4.16.1011
\ added detection for Wilma A14 and used the same nmult & postdiv as other graphics chip,
whereas Wilma A11, A12 & A13 chips retain the changes in v2.12 release
\ sourced SCLK from PCICLK before programming registers
\ added changes for R300 A11: (to sync-in with Setclk for DOS)
— CG workaround
— SDR/DDR detection
— fix REF_DIV, MCLK_SRC_SEL and MPLL_PVG at BIOS default
— MC index register changed
— Updated ATIR6GAA.VXD to v4.21.1002 from v4.21.1001
\ added support for R300 (with 0x4E4? device IDs)
— Updated ATIXPGAA.SYS to v4.13.3.1002 from v4.13.1.1002
[1.13] 05/22/02
— Updated WINCLK.EXE to v1.13 from v1.12
— Updated ATISTCLK.DLL to v4.16.1013 from v4.16.1012
\ removed switching of memory clock to PCIclk (causes screen corruption on WinXP)
— Updated ATIXPGAA.SYS to v4.14.3.1002 from v4.13.3.1002
\ fixed bugs on WinXP
[1.14] 06/04/02
— Updated WINCLK.EXE to v1.14 from v1.13
— Updated ATISTCLK.DLL to v4.16.1014 from v4.16.1013
\ fixed detection of Northbridge deviceID & revisionID on WinXP
\ added reading of memory clock for Cabo & Wilma (WinXP/NT)
— Updated ATIXPGAA.SYS to v4.15.3.1002 from v4.14.3.1002
\ added control codes to read/write from/to Northbridge config space
[1.15] 06/11/02
— Updated WINCLK.EXE to v1.15 from v1.14
— Updated ATISTCLK.DLL to v4.16.1015 from v4.16.1014
\ added support for Wilma deviceID "0xCBB2"
[1.16] 07/15/02
— Updated WINCLK.EXE to v1.16 from v1.15
— Updated ATISTCLK.DLL to v4.16.1016 from v4.16.1015
\ added support for Cabo rev.A31
[1.17] 09/17/02
— Updated WINCLK.EXE to v1.17
— Updated ATISTCLK.DLL to v4.16.1017
— Updated ATIR6GAA.VXD to v4.22.1002
\ added support for newer R300 chipIDs, RV280, M9+, RV350, & M10
[1.18] 12/06/02
— Updated WINCLK.EXE to v1.18
— Updated ATISTCLK.DLL to v4.16.1018
— Updated ATIR6GAA.VXD to v4.22.1002
— Updated ATIXPGAA.SYS to v4.15.3.1002
\ added support for newer R350 chipIDs
\ fixed bug in setting R300 SCLK and lowered R300 MPLL cutoff frequency
[1.19] 01/22/03
— Updated WINCLK.EXE to v1.19
— Updated ATISTCLK.DLL to v4.16.1019
\ added suport for RS300 & RS250
\ fixed bug in setting RV350 memory clock
[1.20] 02/14/03
— Updated WINCLK.EXE to v1.20
— Updated ATISTCLK.DLL to v4.16.1020
\ added support for RS300 & RS250 memory clock and core voltage
\ added DDR2 support
\ fixed R300 single PLL support
[1.21] 03/03/03
— Updated WINCLK.EXE to v1.21
— Updated ATISTCLK.DLL to v4.16.1021
\ fixed bug in reading RS300 memory clock
\ updated parameters for new hynix memory on R300
\ added function to disable single PLL setting for RS300 or RS250
[1.22] 04/16/03
— Updated WINCLK.EXE to v1.22
— Updated ATISTCLK.DLL to v4.16.1022
— updated chip id list
— keep MPLL freq low for RV280 & fixed mclk sync problem for RV280
— powerdown DLL if it is not being uded for R300 and up
— extended setclk eng clk to play with Ref_Div
— read refresh rate from SPD
[1.23] 04/22/03
— Updated WINCLK.EXE to v1.23
— Updated ATISTCLK.DLL to v4.16.1023
— fixed RS250 fast/slow clk switch problem
[1.24] 07/23/03
— Updated WINCLK.EXE to v1.24
— Updated ATISTCLK.DLL to v4.16.1024
\ added support for newer R360, RV360 & M11, RV380 & M24 chipIDs
[1.25] 09/08/03
— Updated WINCLK.EXE to v1.25
— Updated ATISTCLK.DLL to v4.16.1025
— Updated ATIXPGAA.SYS
\ added support for latest RV350, M10 & M11 chipIDs
\ fixed RV380 detection issue
[1.26] 10/31/03
— Updated WINCLK.EXE to v1.26
— Updated ATISTCLK.DLL to v4.16.1026
— Updated ATIXPGAA.SYS
\ added support for newer RS350 chipIDs
[1.27] 11/11/03
— Updated WINCLK.EXE to v1.27
— Updated ATISTCLK.DLL to v4.16.1027
\ added help file support
\ removed memory reset if only change engine clock
[1.28] 11/26/03
— Updated WINCLK.EXE to v1.28
— updated ATISTCLK.DLL to v4.16.1028
\ fixed Memory Clock reporting error when entering power play modes for RS300
[1.29] 11/27/03
— Updated WINCLK.EXE to v1.29
— Added Autoupdate feature via checkbox. Enabling this feature will update
the engine & memory clock values every 5 seconds
[1.30] 12/01/03
— Updated WINCLK.EXE to v1.30
— Added command line compatibility for setting/inc/dec mem/eng clk, viewing
clock info, core voltage, resetting mem/eng clk & single pll
[1.31] 01/31/04
— Updated WINCLK.EXE to v1.31
— Updated ATISTCLK.DLL
— Updated ATIXPGAA.SYS
\ added support for RV370 and M22 ASICs
[1.32] 02/12/04
— Updated WINCLK.EXE to v1.32
— Updated ATIXPGAA.SYS to v4.17.3.1002
\ fixed bus detection issue
[1.33] 03/01/04
— Updated WINCLK.EXE to v1.33
— Updated ATIXPGAA.SYS to 4.18.3.1002
— Updated ATISTCLK.DLL to 4.16.1029
— added support for R420/R423
— Known bug on R420 GDDR3, Memory clock switching causes corruption on screen
[1.40] 03/16/04
— Bug fix of display corruption for R420 GDDR3 when changing mem clk.
— updated WINCLK.EXE to v1.40
— updated ATISTCLK.DLL
— updated ATIXPGAA.SYS
— added support for M18
[1.41] 03/18/04
— Bug fix for display corruption when changed mclk to below 300Mhz
[1.42] 03/30/04
— Bug fix for display corription with M22/M24
[1.43] 04/06/04
— Improved loading/execution time by calling a new function in 'atixpgaa.sys'
driver by reading the contents of the whole BIOS in one single pass.
— New 'help' command line option.
— New Max SPLL/MPLL Freq for R300 base and R400 base chipset when memory
or engine clk is changed
[1.44] 04/27/04
— Now supports >600MHz Memory clock on R420/423
[1.45] 04/28/04
— Added support for RV410/M26
[1.46] 05/10/04
— Updated RV410 support
[1.47] 05/11/04
— Updated Winclk to v1.47
— Updated ATIXPGAA.SYS to 4.22.3.1002
— Updated ATISTCLK.DLL to 1.0.0.34
— Added support for RS400
[1.48] 05/12/04
— Updated Winclk to v1.48
— Updated ATISTCLK.DLL to 1.0.0.35
— Added support for RS480
[1.49] 05/19/04
— Updated Winclk to v1.49
— Updated ATISTCLK.DLL to 1.0.0.36
— Fix for display corruption when mclk < 180 on M18 w/ GDDR1
[1.50] 05/20/04
— Updated Winclk to v1.50
— Updated ATISTCLK.DLL to 1.0.0.37
— Fixed RS400 async mode algorithm
— Fixed RS480 UMA async mode algorithm
— Fixed VCO out of range issue
[2.00] 06/17/04
— Updated Winclk to v2.00
— Updated ATISTCLK.DLL to 1.0.0.38
— Added ATIDGLLK.SYS to 3.0.19.12
— RS480, switch between normal & PM registers, instead of always
switch back normal set
— Updated RS480 side port mode with new VCO values,
allow the algorithm to use post divider 1 & extend FB_div range
[2.10] 06/22/04
— Updated Winclk to v2.10
— Updated ATISTCLK.DLL to 1.0.0.39
— Bug Fix
— Fix for 64-bit addressing
[2.20] 06/24/04
— Updated Winclk to v2.20
— Updated ATISTCLK.DLL to 1.0.0.40
— Updated Device IDs for RV410
[2.30] 08/18/04
— Updated Winclk to v2.30
— Bug Fix
[2.40] 09/26/04
— Updated Winclk to v2.40
— Updated ATISTCLK.DLL to 1.0.0.41
— RS480 memory >350M, using higher VCO settings
— Fixed issues in RS400 Async mode
[2.50] 10/5/04
— Updated Winclk to v2.50
— Updated ATISTCLK.DLL to 1.0.0.42
— Fixed program bug, M18 flag got turn on accidentally
[2.70] 02/08/05
— Updated RC410/RS482 chip ID's
— Updated ATISTCLK.DLL to 1.0.0.44
[2.80] 03/10/05
— Updated RN50 chip ID's
— Updated Winclk to v2.80
— Updated ATISTCLK.DLL TO 1.0.0.45
[3.00] 05/06/05
— add support for multiple GPUs
— combine R520 support into one program
[3.01] 05/24/05
— add support for RV515
[3.10] 06/01/05
— add support for new SetMemoryClock table in ATOMBios
[3.30] 06/27/05
— add support for new ATOMBIOS parser
— add printclkinfo flag to output current clock settings to a file
[3.40] 07/07/05
— add support for R580/M59
[3.50] 07/13/05
— added clk setting table for MEM_PLL_CHPUMP_CURRENT for RS400
— fixed RS480 sideport async memory clock setting problem
— updated ATISTCLK.DLL TO 1.0.0.46
— updated Winclk to v3.50
[3.60] 09/13/05
— added 64-bit support
— added incvoltage,decvoltage command line flags for RX5XX ASICS
— disabled memory clock settings for RS480,RS482 in UMA mode
— updated ATISTCLK DLL to 1.0.0.47
— updated R5CLKLIB DLL to 1.0.0.9
[3.70] 09/28/05
— added RS600 support
— updated R5CLKLIB.DLL to 1.0.0.10
— updated Winclk to v3.70
[3.80] 11/01/05
— fixed both mem and eng clock routines for RS600
— updated R5CLKLIB.DLL to 1.0.0.11
— updated Winclk to v3.80
[3.90]
— fixed RS600 mem clock routine
— updated R5CLKLIB to 1.0.0.12
— updated winclk to v3.90
[4.00] 11/07/05
— changed GUI interface
— added 2D/3D clock support
— added support for RV505/RV516
— added support for fanspeed control
— added VDDC,MVDDC,MVDDQ support
[4.03] 12/19/05
— updated RS480 sideport async memory clock fix
— updated ATISTCLK.DLL TO 1.0.0.50
— updated Winclk to v4.03
[5.00] 01/11/06
— Changed Interface to add VDDCI
— updated code to use new aticlocklib.dll library
— fixed AutoUpdate support
— added commandline support for 3D clocks
[5.01] 02/01/06
— fixed 'Error Loading Driver' Messages on IA-64 systems
[5.10] 02/16/06
— added support for RV516/M64/M62
[5.11] 02/17/06
— fixed both mem and eng clock routines for RV516/M64/M62
[5.20] 02/17/06
— moved RS600 code into aticlocklib.dll
— added separate ATI NB mem clock function
— updated ATISTCLK.DLL TO 1.0.0.51
— updated Winclk to v5.20
[5.21] 02/23/06
— fixed 'Error Loading Driver' Messages on EMT-64 systems
— Added support for RV570/RV560/M68/M67
— Added command line switches for incrementing/decrementing the clocks
— Added support for new setclock method
— updated Winclk to v5.21
[5.22] 02/27/06
— updated aticlocklib.dll to latest version to support RV570 correctly
выглядит все это так:
"изюминкой" ATI WinClock наверное можно назвать поддержку не только изменения вольтажа на серии X1000, но также поддержку разгона для мобильных и интегрированных чипов!
